Cast Aluminum Low Pressure Burner suppliers china will introduce to you: debugging of gas burner burner.
1. Check whether the external gas is in place, whether the pipeline is unblocked, and whether the external power supply is in place.
2. Adjust the load of the burner to a small load, adjust the ignition position to a small load accordingly, turn off the large load to ignite and observe the flame situation, adjust the servo motor or damper opening according to the flame situation to achieve a suitable combustion state.
3. Gradually increase the load, and adjust the opening of the servo motor or damper point by point according to the flame situation to achieve a suitable combustion state.

Precautions for gas engine commissioning and maintenance.
1. When the gas burner continuously fails the secondary ignition procedure, it should be stopped to check whether the gas supply system of the burner is normal and whether the circuit connection is correct. The burner can only be restarted after the fault is resolved.
2. The gas supply pipeline should be strictly rubbed and tapped with a wrench or a metal rod to avoid static electricity or sparks, which may cause a gas explosion.
3. Smoking, welding, cutting and other illegal operations are strictly prohibited on the gas supply valve group or the flange surface of the pipeline.
4. Cast Aluminum Low Pressure Burner suppliers china reminds you that it is strictly forbidden to conduct any open flame test next to the pipeline, valve group and pressure regulating valve to avoid major accidents.